The 2025 brushed stainless steel panoramic elevator combines minimalist metal finishes with high-transparency safety glass for vertical transport in public buildings. Its design emphasizes low-maintenance durability and visual transparency. Technical specifications, materials and safety mechanisms are summarized below.
Core technical specifications
The series is designed to balance durability and visual aesthetics, with major components made from brushed stainless steel to support low maintenance and a modern industrial appearance. The drive system uses established AC variable-frequency technology, intended to provide smooth operation and energy efficiency.
The model supports load capacities from 630 kg to 1,600 kg and speeds from 1.0 m/s to 2.5 m/s. It uses center-opening doors and a light curtain safety system, with a warranty period of 12 months after delivery.
|
Parameter
|
Technical specification
|
|
Load capacity
|
630 kg – 1,600 kg
|
|
Operating speed
|
1.0 m/s – 2.5 m/s
|
|
Drive type
|
AC variable-frequency drive
|
|
Door opening
|
Center opening
|
|
Safety system
|
Light curtain protection system
|
|
Warranty
|
12 months after delivery
|
Design and material finish
The car uses modular brushed stainless steel finishes for upper and lower cabin covers, wall panels and the car operating panel. The material is corrosion-resistant and produces a soft metallic sheen under lighting.
High-strength safety glass provides all-round visibility, making the elevator suitable for shopping malls, hotels and office buildings with high aesthetic requirements.
A circular brushed stainless steel handrail is fitted inside the car, adding safety while reinforcing the unified design.
Safety and operation
Operation relies on a traction drive system that balances the car against a counterweight via steel wire ropes and guide rails, enabling smooth ascent and descent.
For high-frequency public use, a light curtain safety protection system is standard, monitoring for obstacles while the doors close to support passenger safety.
The product carries ISO 9001, CCC and CE certification, meeting industry safety standards.
Frequently Asked Questions
Is a sudden power failure during operation dangerous?
No. The elevator is equipped with electrical and mechanical safety devices. If power is interrupted, the safety circuit cuts and the brake automatically locks the car. Planned outages are normally notified in advance by utilities, allowing precautionary measures.
Can the car door cause injury when closing on a passenger?
No. The door system is equipped with an anti-pinch switch and light curtain detection. If an obstacle such as a person is detected during closing, the door system automatically issues a reopening command. Closing force is also set within a safe range.
How are installation space requirements confirmed?
Shaft dimensions, pit depth and overhead height depend on the load capacity from 630 kg to 1,600 kg and the door configuration, including single-opening or through-door arrangements. Requirements must be checked against building drawings and the elevator specification table, with an on-site survey by a professional installation team.
Il tuo messaggio deve contenere da 20 a 3000 caratteri!
